Styxhips 20 Clipszip -

Place the zipper pull into the jig (wrong side up).

Take the two sides of your prepared zipper tape and insert them into the zipper pull, ensuring the sides are even. StyxHips 20 Clipszip

This method is used to create custom-length zippers for sewing projects like bags or pockets. Zipper Tape: (By the yard/meter) Zipper Sliders/Pulls: (20+ pcs) Zipper Jig or Helper: (Optional, but recommended) Scissors Pliers (for stopping) 1. Prepare the Zipper Tape Place the zipper pull into the jig (wrong side up)

Ensure your zipper pulls match the size of your zipper tape (e.g., #5 sliders for #5 tape). Zipper Tape: (By the yard/meter) Zipper Sliders/Pulls: (20+

inch of the plastic/metal teeth from one side of the tape to make inserting the pull easier.

Ensure the other end of the tape teeth are aligned, but with one side slightly longer (by about 12one-half inch) to facilitate the zipper pull engagement. 2. Install the Slider (The "Zipper Jig" Method)

If the zipper teeth are not aligning correctly, pull the slider back off and ensure one side of the tape is slightly shorter (staggered) before re-inserting it. Mesh Projects: If using with mesh, topstitch 18one-eighth inch from the edge to secure it.