: Ensure all equipment is turned off and the PP 2 is disconnected from its power supply. Connect Turntable :
: If your turntable has a separate ground wire, secure it to the GND thumb screw on the back of the PP 2 to minimize hum. Nad Phono Preamp Pp2 Manual
Plug your turntable's RCA leads into the or MM inputs on the back of the PP 2, depending on your cartridge type. Match the colors: Red for Right (R) and White for Left (L). : Ensure all equipment is turned off and
Follow these steps to correctly integrate the PP 2 into your audio system: Match the colors: Red for Right (R) and White for Left (L)
If you encounter issues, refer to the following common solutions: :
: Verify that the PP 2 is connected to a standard Line-Level input and not a Phono input on your receiver. Phono Preamplifier PP 2 - HiFi Gear
: Check that all RCA plugs are fully inserted into their respective sockets on both the PP 2 and the amplifier.