Mitel-5320e-ip-phone-stuck-on-dhcp-discovery May 2026

Hold the (or the volume keys) while booting the phone to enter the configuration menu.

: Mitel phones often operate on a specific Voice VLAN. If the switch port isn't configured to "tag" the voice traffic or if the DHCP server isn't listening on that specific VLAN, the discovery process will fail. mitel-5320e-ip-phone-stuck-on-dhcp-discovery

: This clears any residual configurations that might be blocking the connection. Unplug the power/Ethernet. Hold the # key while plugging it back in. When "Configure Phone?" appears, select * for Yes . Hold the (or the volume keys) while booting

: Confirm that your router or server has an active DHCP pool with available addresses. If the pool is full, the phone will wait indefinitely. : This clears any residual configurations that might

When a Mitel 5320e IP phone Go to product viewer dialog for this item.

is stuck on "DHCP Discovery," it means the device is powered on but cannot obtain an IP address from your network's DHCP server . This is a common hurdle during setup or after network changes. Core Troubleshooting Steps

: Rule out hardware failure by swapping the Ethernet cable or plugging the phone into a known working port used by another IP phone. Advanced Fixes