Kk2.jpg -

: Connect your Electronic Speed Controllers (ESCs) to the right side of the board. Ensure you use the correct motor layout for your frame type (e.g., Quadcopter X or +).

: Turn on your transmitter and set the throttle to maximum. kk2.jpg

: Wait for the ESCs to emit a short beep (full throttle signal), then immediately lower the transmitter throttle to idle. : Connect your Electronic Speed Controllers (ESCs) to

: Power up your transmitter (TX) and FC. Navigate to the "Receiver Test" menu on the LCD. Move your TX sticks and verify the values change correctly (e.g., pushing the stick left should show "Rudder Left"). If they move the wrong way, use your TX's "Reverse" setting. use your TX's "Reverse" setting.