721-.rar May 2026

Place the holder into the carriage arm and tighten the locking knob.

is a 28-inch model typically requiring a stand for stability. : 721-.rar

: Use the arrow keys on the cutter's control panel to move the blade to your starting point and press "Origin" or "Local" to set the zero point. Place the holder into the carriage arm and

Set the output device to the correct found in your computer's Device Manager. Ensure the Baud Rate is set to 9600 . VinylMaster Setup : Set the output device to the correct found

Insert the blade into the blade holder (cartridge) and adjust the cap so only a tiny sliver of the blade (about half the thickness of a credit card) is visible.

model and choose "Direct USB" or "Direct COM" depending on your cable. 4. Running Your First Cut